WACO YMF F5 Series, Руководство по обслуживанию

Страница: 8 / 401

WACO Classic Aircraft Corporation
YMF WACO F5 SERIES MAINTENANCE MANUAL
REVISION: H Page
7
of
33
RELEASED: 07/21/2017 PART NO. YMFAMM-1
5.2 SPECIFICATIONS:
All models are manufactured in conformance with FAA Type Certificate Number ATC542 and
Supplemental Type Certificate Number SA1000GL the details of which can be found by accessing the
Type Certificate Data Sheet (TCDS) for the WACO Aircraft Company YMF at
www.faa.gov . Although a
summary of specifications is given here, the TCDS should always be consulted when making conformity
determinations.
5.2.1 MODEL DESIGNATIONS:
Although Type Certificate Data Sheet ATC542 lists this series simply as the Model YMF F5 modification,
modified by STC SA1000GL, for the purpose of clearly identifying to which aircraft an instruction or
reference applies, the following model designations are used in this manual.
Model YMF WACO F5A (Approved March 10, 1986):
This model is the first of the series manufactured by Classic Aircraft Corporation of Lansing MI having a
maximum gross takeoff weight of 2650 pounds, a Jacobs R755B2 engine and carry serial numbers
F5001 through F5009. Although fitted with a Jacobs R755B2 engine rated at 275 HP at 2200 RPM, this
model airframe is limited by propeller or placard to 245 HP and 1950 RPM at sea level.
CAUTION
ALTHOUGH A VARIETY OF PROPELLERS ARE ELEGIBLE FOR
INSTALLATION ON THIS MODEL, IT SHOULD BE NOTED THAT THE 245
HP LIMITATION CAN BE EXCEEDED WITH A PROPELLER OF LESS
THAN 96 IN. DIAMETER AND LESS THAN 72 IN. PITCH. IT IS THE
OPERATOR’S RESPONSIBILITY TO INSURE THAT THE RPM AND HP
LIMITATION IS NOT EXCEEDED.
Model YMF WACO F5B (Approved January 28, 1988):
This model is the second of the series manufactured by Classic Aircraft Corporation at Lansing MI, has a
maximum gross takeoff weight of 2770 pounds and are identified by serial numbers F5010 through
F5036. This model is fitted with a Jacobs R755B2 engine with a horsepower rating of 275 at 2200 RPM
and is not HP limited.
Model YMF WACO F5C (Approved June 24, 1991):
The F5C is the third model of the series and has been manufactured in both Lansing and Battle Creek MI,
first by Classic Aircraft Corporation and since 1997 by WACO Classic Aircraft Corporation. This version
has a maximum gross takeoff weight of 2950 pounds and is powered by the Jacobs R755B2 engine rated
at 275 HP at 2200 RPM and may be either carburetor or fuel injection equipped.
Model YMF WACO F5C-8 (Approved May 12, 2010):
The F5C-8 is a variation of the F5C with the optional Jacobs R755A2 engine rated at 300 HP at 2200
RPM installed either during manufacture or as a retrofit and may be equipped with either carburetor or
fuel injection. Serial numbers F5C040 and up are eligible for this
option and can be identified by a “-8” in
the serial number (example F5C-8-121).
5.2.2
DIMENSIONS:
The general dimensions of the Models F5A and F5B are as follows:
WING SPAN (UPPER) 30 Ft. 0 In. (9.14M)
WING SPAN (LOWER) 26 Ft. 10 In. (8.18M)
LENGTH (OVERALL) 23 Ft. 4 In. (7.11M)
HEIGHT (OVERALL) 8 Ft. 6 In. (2.59M)
The general dimensions of the Model F5C are as follows:
WING SPAN (UPPER) 30 Ft. 0 In. (9.14M)
WING SPAN (LOWER) 26 Ft. 10 In. (8.18M)