manualshive.com logo in svg

WACO YMF F5 Series, Руководство по обслуживанию

Модель самолета WACO YMF F5 Series - это удивительно красивый и мощный аппарат с богатой историей. Для обеспечения правильного обслуживания и безопасности полетов, рекомендуется загрузить бесплатное Руководство по обслуживанию с нашего сайта manualshive.com. Наслаждайтесь каждым моментом полета с этим идеальным самолетом.

Поделиться
Скачать
background image

E-124

 

 
7.0  WARTUNG

 

7.1

  Außer  den  in  Punkt  6  beschriebenen  Kontrollen  sind  keine  beson-

deren  Wartungsarbeiten  vorgeschrieben.  Für  das  Ausbessern  von 
kleinen  Schäden  im  Lack;  Blattkörper  und  an  den  Kanten  dürfen 
übliche PU- oder Acryllacke und Epoxy-Harze verwendet werden. 

 

7.2

  Vom  Hersteller  wird  PU-Lack  oder  Acryllack  verwendet,  der  gegen 

fast  alle  Lösungsmittel  beständig  ist.  Die  Blätter  können  mit  den 
üblichen  Kfz-Reinigungs-  und  Schutzmitteln  behandelt  werden. 
Wichtig ist, daß das Eindringen von Feuchtigkeit in den Holzkern mit 
allen  Mitteln  verhindert  wird.  Im  Zweifel  einen  Prüfer  mit  ent-
sprechender  Berechtigung  hinzuziehen,  der  die  Reparaturmöglich-
keit beurteilt. 

 

Falls  Reparaturen  selbst  ausgeführt  werden,  die  Trockenzeiten  von 
Kunstharz und Lacksystemen beachten. 

 

7.3

  Es  sind  keine  Wartungsarbeiten  an  der  Nabe  durchzuführen,  weil 

alle beweglichen Teile, die Verschleiß ausgesetzt sind, im Innern der 
Nabe liegen. Blattlagerung und Verstellteile werden bei Montage mit 
Spezial-Schmiermitteln  gefüllt,  die  für  die  Zeit  zwischen  den 
Überholungen  ausreicht.  Ein  Korrosionsschutz  der  Nabe  mit 
verdünntem  Triebwerksöl  oder  entsprechendem  Mittel  wird empfoh-
len. 

 

7.4

  Reparaturen  an  Spinnerteilen  sind  nicht  zulässig.  Gerissene  Spin-

nerdome  und  Füllbleche  oder  Spinnerträger  sind  durch  lufttüchtige 
zu ersetzen. 

 

7.5

  Abgebrochene  oder  beschädigte  Blätter  können  beim  Hersteller  re-

pariert  werden,  wenn  mindestens  85  %  des  Blattkörpers  rißfrei  vor-
handen  sind.  Beschädigungen  z.B.  an  der  Austrittskante  können 
angeleimt werden, die Kunststoffummantelung kann ersetzt werden, 
ebenso  kann  ein  neuer  Kantenbeschlag  angebracht werden.  Blätter 
können  satzweise  oder  einzeln  ersetzt  werden.  Immer  Propeller-
Werk-Nummer angeben. 

 

Im  Falle  einer  Bodenberührung  ist  die  Nabe  nur  dann  noch 
lufttüchtig,  nachdem  eine  Rißprüfung  und  eine  Überprüfung  der 
Abmessung  durchgeführt  wurde  und  diese  Überprüfungen  keinen 
Hinweis  auf  eine  Beschädigung  ergeben.  Bei  Unklarheiten  müssen 
sowohl Nabe als auch die gebrochenen Blätter an den Hersteller zur 
Überprüfung geschickt werden. 

 

Im  Falle  einer  Bodenberührung  mit  Aluminiumblättern  siehe 
Überholungshandbuch ATA 61-18-09. 

 
Seite 33 

11.03.2005  

 

7.0  MAINTENANCE

 

7.1

  There is no special maintenance schedule for this propellers beyond 

the usual inspections as per item 6. For the repair of minor damages 
in  the  blade  surface  and  edges,  automotive  material  such  as  PU or 
acryl paint and Epoxy resin can be used. 

 

7.2

  The  surface  finish  is  made  with  PU  lacquer  or  acryl  lacquer.  This 

material  is  resistant  against  nearly  all  solvents.  The  blades  can  be 
cleaned with normal car cleaners and polish. It is important to avoid 
moisture  penetrating  into  the  wooden  core.  If  necessary,  please 
consult an aircraft inspect or for final decision concerning repair. 

 
 
 

If the repair is made locally, please observe the curing time of resin 
and paint systems. 

 

7.3

  There  are  no  frequent  maintenance  works  required  on  the  hub  be-

cause  all  moving  parts  are  inside  the  hub  and  not  exposed  to  the 
environment. Blade bearings and pitch change mechanism are filled 
with  special  lubricants  and  there  is  no  need  to  refill  between  over-
hauls.  A  corrosion  protection  of  the  hub  with  thinned  engine  oil  or 
anticorrosion spray is recommended.  

 
 

7.4

  Repair  of  spinner  parts  is  not  permissible.  Cracked  spinner  domes, 

filler plates and backplates are to be replaced by airworthy parts. 

 
 

7.5

  Broken  tips  and  damaged  blades  can  be  repaired  by  the  manu-

facturer  if  a  minimum  of  85  %  of  the  blade  remains  without cracks. 
Damages  on  the  trailing  edge  can  be  repaired  because  the  epoxy 
cover  can  be  replaced  and  a  new  erosion  sheet  can  be  installed. 
Blades  can  be  replaced  individual  or  as  a  complete  set.  Always  tell 
the serial no. of the propeller. 

 

In case  of  a  ground  strike  the  hub  is  still airworthy if the crack- and 
dimensional inspection do not show any signs of a damage. 

 

In case of doubt send the affected hub as well as the broken blades 
to the manufacturer for evaluation.

 

 

In case of a ground strike with Aluminum blades refer to  

 

Overhaul Manual ATA 61-18-09 for evaluation. 

 
 
 
 
Page 33 

2005/11/03 

Содержание YMF F5 Series


















































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для YMF F5 Series

KANGKE INDUSTRIAL SUPER KRAFT PRO-FLY 540 Quick Start Manual preview
SUPER KRAFT PRO-FLY 540
Бренд: KANGKE INDUSTRIAL Страницы: 6
Horizon Hobby Hangar 9 ultra stick pnp Instruction Manual preview
Hangar 9 ultra stick pnp
Бренд: Horizon Hobby Страницы: 48
Composite-ARF SuperXtra 330L Instruction Manual preview
SuperXtra 330L
Бренд: Composite-ARF Страницы: 37
Nova FACTOR 2 User Manual preview
FACTOR 2
Бренд: Nova Страницы: 39
MAC PARA Blaze User Manual preview
Blaze
Бренд: MAC PARA Страницы: 40
Cessna T303 Maintenance Manual preview
T303
Бренд: Cessna Страницы: 28
Cessna TR182 1979 Pilot Operating Handbook preview
TR182 1979
Бренд: Cessna Страницы: 328
Hangar 9 J-3 Piper Cub Assembly Manual preview
J-3 Piper Cub
Бренд: Hangar 9 Страницы: 44
Hangar 9 F6F Hellcat 60 ARF Assembly Manual preview
F6F Hellcat 60 ARF
Бренд: Hangar 9 Страницы: 44
Hangar 9 Sbach 342 60 Instruction Manual preview
Sbach 342 60
Бренд: Hangar 9 Страницы: 48
Nova BANTAM Manual preview
BANTAM
Бренд: Nova Страницы: 39
Textron Cessna 680 Citation Sovereign Service Bulletin preview
Cessna 680 Citation Sovereign
Бренд: Textron Страницы: 12
Textron Cessna Citation Excel 5355 Operation Manual preview
Cessna Citation Excel 5355
Бренд: Textron Страницы: 29
Core GTS6 Manual preview
GTS6
Бренд: Core Страницы: 12
LittleCloud URUBU 21 Manual preview
URUBU 21
Бренд: LittleCloud Страницы: 7
Flow Fusion L User Manual preview
Fusion L
Бренд: Flow Страницы: 24
AirCross U Prime User Manual preview
U Prime
Бренд: AirCross Страницы: 25
AirDesign RIDE 3 Manual And Service Book preview
RIDE 3
Бренд: AirDesign Страницы: 75

Бренды по названию

Популярные бренды

Загрузить еще бренды