manualshive.com logo in svg

Wacker Neuson RD 12A, Руководство оператора

Поделиться
Скачать
Wacker Neuson RD 12A Скачать руководство пользователя страница 46

Operation

RD 12A

46

                                       

wc_tx001071gb.fm

4.24 Transmission

See Graphic: wc_gr002953

Both roller drums are fitted with hydraulic motors which are driven by
an infinitely variable displacement pump and hydrostatic transmission.
Forward and reverse travel are selected using a forward/reverse
control 

(15)

 located next to the driver’s seat. In order to comply with

safety standards, the machine has a device which only enables
starting of the engine when the forward/reverse control is in the
NEUTRAL position.

Forward/reverse control

Shift the forward/reverse control 

(15)

 into FORWARD 

(F)

 or REVERSE

(R) 

according to the direction of travel desired. The further forward or

reverse the control is positioned, the faster the roller will travel.
Road speed is the same in both FORWARD and REVERSE. If you
wish to change direction of travel from FORWARD to REVERSE or
vice versa, move the control to the NEUTRAL position 

(N)

, allow the

vehicle to come to a complete stop, then move the control in the
direction desired. 
During operation run the machine at high throttle. Quickly press and
release the upper half of the throttle switch 

(54)

 to bring the engine to

high throttle.
When negotiating gentle slopes, keep the engine at high throttle and
the forward/reverse control at the minimum speed position.

NOTICE

:

 This vehicle has a hydrostatic transmission which means

that the forward/reverse control can also be used as an engine brake.
Shifting the control to the NEUTRAL position stops the machine travel.

NOTICE

:

 Never drive the machine at low idle speed. Driving the

machine at low idle speed can damage the drive pump.

Содержание RD 12A











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды