manualshive.com logo in svg

Wacker Neuson GV 2500A, Руководство по ремонту

Поделиться
Скачать
Wacker Neuson GV 2500A Скачать руководство пользователя страница 25

GV Generators

Troubleshooting Voltage Issues

wc_tx000772gb.fm

25

Continued from the previous page.

5. Check the resistance between the brown (Br) wire of the wiring harness connec-

tor 

(b)

 and the ground stud 

(x)

.

Is any resistance measured?

6. Disconnect the 6-wire connector 

(c)

.

7. Check for continuity between the light green (LG) wire of the 6-wire connector 

and the black (B) wire of the generator.

Does the wiring have continuity?

8. Check the resistance between the light green (LG) wire of the wiring harness  6-

wire connector 

(c)

 and the ground stud 

(x)

.

Is any resistance measured?

9. Check for continuity between the red-white (R/W) wire of the 6-wire connector 

and the red (R) wire of the generator.

Does the wiring have continuity?

This procedure continues on the next page.

Yes ____

No ____

The sensing wire has failed. Replace the stator.

Continue.

Yes ____

No ____

Continue.

The wiring has failed. Replace the stator.

Yes ____

No ____

The sensing wire has failed. Replace the stator.

Continue.

Yes ____

No ____

Continue.

The wiring has failed. Replace the stator.

Содержание GV 2500A











































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды