VTech wf6909 Скачать руководство пользователя страница 54

Страница: 54 / 71

www.vtechphones.com

Appendix

Batteries

After the battery is fully charged, you can expect the following performance:

Operaton

Operatng tme

Whle n use (talkng)

6 hours

Whle not n use (standby*)

96 hours (approxmately 4 days)

*Handset is off the

base unt but not n use.

The battery needs chargng when:

•  A new battery s nstalled n the handset.
•  The telephone beeps twce once taken off the base unt.
•  Battery ndcator on screen s empty.

CAUTION:

To reduce the risk of fire or injury to persons, read and follow these instructions:

1. Use only the battery(ies) specified.
2. Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special

dsposal nstructons.

3. Do not open or mutlate the battery(es). Released electrolyte s corrosve and may cause burns or njury to the eyes or

skn. The electrolyte may toxc f swallowed.

4. Exercse care n handlng batteres n order not to short the battery to conductve materals such as rngs, bracelets, and

keys. The battery and/or conductor may overheat and cause burns.

5. Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and

limitations specified in this manual.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

The AC adapter s used as the man dsconnect devce, ensure that the AC outlet s located/nstalled near the unt and s easly accessble.

Содержание wf6909








































































Результаты поиска

Содержание wf6909

Отзывы:

Похожие инструкции для wf6909

Бренды по названию

Популярные бренды

VTech wf6909, Руководство пользователя

Результаты поиска

Содержание wf6909

Отзывы:

Похожие инструкции для wf6909

Бренды по названию

Популярные бренды