VSpeak ECU converter HORNET, Руководство пользователя, Страница: 5 / 18

ECU Converter HORNET Version: 1.1 www.VSpeak-modell.de
Page 5/18
2.1 Jeti Duplex EX
2.1.1 EX-data DC/DS-radio
The EX-Protocol is partially backwards compatible. On older non-EX devices you get only
Jetibox functions. On EX devices like the DC/DS radios and the Jeti "Profibox" you get
additional data.
(VSECU …
VS peak ECU Converter ):
FUEL, F-FLOW, THRO not supported on HORNET II
On HORNETT II PUMP and BATT values are only
updated as long as these voltages are shown on
STATUS DISPLAY 1.
The EX-data IS ONLY UPDATED if the HORNET ECU is on STATUS DISPLAY 1 (after
switching on the radio this display is active).
2.1.2 Jetibox
On the Jetibox all data of the HORNET ECU normally displayed on the TERMINAL are shown
(except characters that cannot be displayed on Jeti Systems).
Furthermore you can use the Jeti-keys to edit all values available on the TERMINAL. Please
refer to the HORNET ECU's manual.
2.1.2.1 Key assignment