ECU Converter HORNET Version: 1.1
Page 13/18
2.2.4.1
Alarms / Sensor setting
Settings
Value range
Step size
Signal tone
10 . . . 2500 ml
10 ml
U
3.0 . . . 12.0 V
0.1 V
P
20.0 . . . 99.9
x 1000rpm
100 rpm
T
GAM / ESC
Upon delivery, the warning thresholds are set as shown in the picture.
If a value falls below the warning threshold, the set signal tone will sound or a speech output
of the associated signal tone.
The rotation speed monitoring is activated by reaching the AUTO status and deactivates when
the pump voltage reaches 0.00V. A speed alarm can thus signal a "turbine flameout"
2.2.4.2
MSB – Adresses Multiplex Sensor Bus
Upon delivery, the addresses for the display of the measured values are set as shown below:
MSB-compliant, the addresses can be arbitrarily set between 0 and 15. Not to show values can
be turned off ("OFF").
An address for double occupancy values within the ECU converter is excluded. If an address
has been set, which was already associated with another value, the current is set to "OFF".
