VSpeak ECU converter HORNET, Руководство пользователя, Страница: 17 / 18

ECU Converter HORNET Version: 1.1 www.VSpeak-modell.de
Page 17/18
3 Update
The processor on the ECU Converter contains a SD bootloader with a version counter.
If firmware updates are available they will be sent via mail. The data-files attached to the
e-mail have to be copied to the Micro SD card (formatted FAT or FAT16), this card has to be
inserted into the ECU Converter and the power has to be switched on. The boot loader will
recognize the new software version and will install it (blue LED "flickers") and is then up to
date.
4 Accessories
A micro SD card is NOT included in the package. For updates only Micro-SD cards with a
maximum capacity of 2GB are supported. You can obtain a matching card at
www.vspeak-modell.de .
Western-cables can be obtained at www.reichelt.de and many other stores.
5 Technical data
Power supply
3,5 … max. 12V from HORNET ECU
Power usage ~20 mA (at 5V from HORNET ECU)
Telemetry connection 3,5 … max. 9V from receiver, pulse amplitude min 2,7V
Dimensions 60 x 22 x 12 mm
Weight 12 g (incl. connection cables)
Connections
RJ12 Western plug (cable length ~ 25 cm)
UNI servo plug (cable length ~ 30 cm) Jeti / HoTT / MSB
X-Bus plug (cable length ~ 28 cm) Spektrum
6 Instructions for disposal
Equipment marked with the symbol should not be disposed of within household
waste.