VSpeak ECU converter HORNET, Руководство пользователя

Страница: 12 / 18

ECU Converter HORNET Version: 1.1 www.VSpeak-modell.de
Page 12/18
2.2.3.2 ESC - Electronic Speed Control
*) FUEL, and FUEL in % not on HORNET2
The ESC temperature display is limited to 235 ° C, so the turbine jet temperature is shown
divided by 10, or the other way around: 54 ° C in the display corresponds to 545 ... 544 ° C
(digit is rounded).
The pump power is indicated by a factor of 10, ie, 11.4V correspond to a pump voltage
of 1.14V.
The tank level is displayed on the display as capacity value, ie, 2450mAh are 2450ml. On the
other hand, the percentage tank level is displayed as the current, ie, 81,6A correspond to 81.6%
tank level. The tank level is thus easy to read via the associated bar display. The 100% value is
set at startup. The value in ml transferred during the powerup of the ECU is used as 100% value
for calculation.
2.2.4 Parameterization
The change of sides takes place
with Enter and ESC button of the
SmartBox or with the appropriate
buttons on the HoTT transmitter.
The parameter is selected
with the INC- and DEC-
buttons of the SmartBox
(or the buttons oft he Hott
transmitter) „
>
“.
FUEL in % *)
PUMP *10
FUEL *)
BATT
EGT
RPM
RPM (max)
EGT (max)
ESC
ENTER
DEC
INC
With or the value of the
selected parameter is enabled for change
(inverted).
With the value can be increased,
With it can be reduced.
Stored is after or
INC+DEC
SET
INC
DEC
SET
INC+DEC