VSpeak ECU converter HORNET, Руководство пользователя

Страница: 4 / 18

ECU Converter HORNET Version: 1.1 www.VSpeak-modell.de
Page 4/18
2 Telemetry
The voltage for the VSpeak ECU Converter is supplied by the HORNET ECU. As soon as you
switch on the HORNET ECU and apply a valid signal to the throttle channel (either from the
radio or a servo tester) you will get telemetry data. Otherwise no data is generated.
The telemetry of the ECU Converter can be used to switch between the systems Jeti Duplex
EX, HoTT and multiplex. The ECU Converter for spectrum comes with the special XBus
connector, so no switching for another telemetry system is possible here.
2.0 Selection of the telemetry system
When you turn on the Telemetry System is signaled by a LED for a period of 3 seconds. While
the blue LED flickers, the STATUS LED shows the chosen telemetry system:

green Jeti Duplex EX

red Multiplex

green (flickering) HoTT
Double-click on the function button (similar to the double click of a computer mouse), the
telemetry system can be switched. This is acknowledged by the signal generator with a short
sound (frequency up and down). At the same time, the LEDs indicate the newly recruited
telemetry system. To preserve safety during the selection of the telemetry system, the ECU
Converter does not transmit any information until a restart. The setting is saved.