Advanced wireless settings allow configuring the 570n unit to get the best performance/capacity
of the link:
Transmit power
: set the unit's transmitting power at which the device will transmit data. The
larger the distance, the higher transmit power is required. To set transmit power level use the
slider or enter the value manually. When entering the transmit power value manually, the slider
position will change according to the entered value. The maximum transmit power level is limited
to the allowed value by country in which device is operating regulatory agency.
Enable ATPC
: select to enable Automatic Transmit Power Control (ATPC). If enabled, device
radio will continuously communicate with remote unit's radio in order to adjust the optimal
transmit power automatically.
Antenna Gain, dBi
: displays integrated antenna gain in dBi. This entry field will be
editable for the connectorized antennas where the custom value of the antenna gain must
be specified.
Comply regulations
: if enabled, the 570n will automatically adjust radio settings (transmit
power and DFS) to conform regulatory rules of the selected country.
Enable DFS
: select to enable a radar detection. With enabled DFS, 570n unit monitors the
operating frequency for radar signals. If radar signals are detected on the channel, the unit
randomly selects a different channel.
Mode
: choose the unit's antenna operating mode:
SISO
: single input single output. The device will use 1x1 antenna for data transfer. The
antenna will be chosen automatically.
MIMO
: multiple input multiple output. The device will use 2x2 antenna for data transfer
(two simultaneous streams).
Max data rate
: select the device data transmission rates in Mbps from the drop-down list. The
570n will attempt to transmit data at the highest data rate set. If there will be an interference
encountered, the 570n will step down to the highest rate that allows data transmission.
Transmit queue length, frames
: specify the length in frames of the transmit queue.
Содержание SuperAP 570n
Страница 1: ...SuperAP 570n User Manual October 2012...