VP Networks SuperAP 570n, Руководство пользователя

Страница: 16 / 71

Antenna alignment : measure received signal quality of the wireless link to align antenna
in the best direction.
Site Survey : information about other wireless networks in the local area.
Delayed reboot : setup delayed reboot for 570n unit.
Ping : perform ping command.
Traceroute : perform graphical traceroute command.
Spectrum analyzer : check the signal strength on available channels.
Applying and Saving Configuration Changes
There are three general buttons located on the right top corner of the WEB GUI allowing
managing device configuration:
Apply : if pressed new configuration settings are applied instantly. It will take few seconds
and the device will be running with new settings. It should be noted that pressing Apply
button settings are not written to the permanent memory. Therefore, if the device is
rebooted it will start with old configuration settings.
Discard : if pressed parameter changes are discarded. It should be noted that if Apply or
Save&Apply is pressed it is not possible to discard changes.
Save&Apply : if pressed new configuration settings are applied instantly and written to the
permanent memory.
It is not required to press Apply or Save&Apply in every Web GUI tab. The
device remembers all changes made in every tab and after action button is used, all
changes will be applied.
Configuration Guide
This document contain product’s powerful web management interface configuration
description allowing setups ranging from very simple to very complex.
Status
Information