VP Networks SuperAP 570n, Руководство пользователя

Страница: 34 / 71

is used to encrypt data packets transmitted between RADIUS server and client.
The RADIUS key must be the same on the RADIUS servers and the RADIUS client.
570n Advanced Wireless Settings
Advanced parameters allow configuring the device to get the best performance/capacity of the
link.
Tx power : set the unit's transmitting power at which the device will transmit data. The larger
the distance, the higher transmit power is required. To set transmit power level use the slider or
enter the value manually. When entering the transmit power value manually, the slider position
will change according to the entered value. The maximum transmit power level is limited to the
allowed value by country in which device is operating regulatory agency.
Enable ATPC : select to enable Automatic Transmit Power Control (ATPC). If enabled, device
radio will continuously communicate with remote unit's radio in order to adjust the optimal
transmit power automatically.
Antenna Gain, dBi : displays integrated antenna gain in dBi. This entry field will be
editable for the connected antennas where the custom value of the antenna gain must be
specified.
Comply regulations : if enabled, the 570n will automatically adjust radio settings (transmit
power and DFS) to conform regulatory rules of the selected country.
Fragmentation : specify the Fragmentation threshold using slider or enter the value manually
[256-2346 bytes]. This is the maximum size for a packet before data is fragmented into multiple
packets. Setting the Fragmentation threshold too low may result in poor network performance.
Only minor modifications of this value are recommended.
RTS : specify the RTS threshold using slider or enter the value manually [0-2347 bytes]. The
RTS threshold determines the packet size of a transmission and, through the use of an access
point, helps control traffic flow.