MAC address
: specify the clone MAC address if required. The ISPs registers the MAC
address of the router, and allows only that MAC address to connect to their network. In such
case if there is need to change hardware (router), you need to notify your ISP about MAC
address change, or simply set the router's MAC address to the MAC address of the previously
router/computer.
VLAN ID
: specify the VLAN ID for traffic tagging on required radio interface [2-4095]. The
Station devices that associate using the particular SSID will be grouped into this VLAN.
DHCP fallback setting
: specify IP address, Subnet mask, Default gateway and optionally
DNS server for DHCP fallback. In case the 570n unit will not get the IP address from the
DHCP, the specified fallback IP settings will be used.
Enable IP alias
: specify the alternative IP address and the netmask for 570n unit management.
WAN mode
: choose PPPoE to configure WAN interface to connect to an ISP via a PPPoE:
Содержание SuperAP 570n
Страница 1: ...SuperAP 570n User Manual October 2012...
