MAC address
: specify the clone MAC address if required. The ISPs registers the MAC
address of the router, and allows only that MAC address to connect to their network. In such
case if there is need to change hardware (router), you need to notify your ISP about MAC
address change, or simply set the router's MAC address to the MAC address of the previously
router/computer.
VLAN ID
: specify the VLAN ID for traffic tagging on required radio interface [2-4095]. The
Station devices that associate using the particular SSID will be grouped into this VLAN.
WAN mode
: choose Static IP to specify IP settings manually. This option needs parameters
listed below:
IP address
: specify static IP address.
Subnet mask
: specify a subnet mask.
Default gateway
: specify a gateway.
DNS server
: specify primary and/or secondary DNS server
Enable IP alias
: specify the alternative IP address and the netmask for 570n unit management.
WAN mode
: choose Dynamic IP to enable DHCP client on the WAN side. This option does
not need any parameters.
Содержание SuperAP 570n
Страница 1: ...SuperAP 570n User Manual October 2012...
