Link location
: displays the physical location of the device. This name has the same value as
Device location in the Device settings.
Contact information
: specify the identification of the contact person for this managed device,
together with information on how to contact this person.
R/O community
: specify the read-only community name for SNMP version 1 and version 2c.
The read-only community allows a manager to read values, but denies any attempt to change
values.
R/O user
: specify the user name for read-only SNMPv3 access. The read-only community
allows a manager to read values, but denies any attempt to change values.
R/O user password
: specify the password for read-only SNMPv3 access [string].
Clock/NTP
Use this section to manage the system time and date on the device automatically, using the
Network Time Protocol (NTP), or manually, by setting the time and date on the device.
The NTP (Network Time Protocol) client synchronizes the clock of the device with the defined
time server. Choose NTP from the configuration menu, select your location time zone and enter
NTP server in order to use the NTP service.
Configuration
: choose the system clock configuration mode [NTP/Manual].
Timezone
: select the timezone. Time zone should be specified as a difference between local
time and GMT time. Save last known time : select to recall the timestamp that was saved on last
reboot. When NTP is enabled, this option will set system clock to last reboot time if no NTP
servers are available.
NTP server
: specify the trusted NTP server IP or hostname for synchronizing time with [IP
address].
To adjust the clock settings manually, choose the configuration mode as Manual and specify
the following settings:
Содержание SuperAP 570n
Страница 1: ...SuperAP 570n User Manual October 2012...
