Volvo L45H 2016, Руководство оператора, Страница: 266 / 318

Touch-up painting Touch-up painting
- Check if there are any damaged areas of the paint
finish.
- At first clean the machine.
- Rectify any damage to paint finish in a
professional way.
Cleaning engine compartment Cleaning engine compartment
Machines operating in dusty, fire-hazardous
environments, e.g., log handling, woodchip
handling, grain handling, and animal feed
industries, require daily inspection and cleaning of
the engine compartment and surrounding areas.
When operating in other conditions, checking and
cleaning is required at least once a week.
WARNING WARNING
Risk of burns.
Engine and exhaust system components get very
hot and can cause severe burns.
Avoid contact with engine compartment covers,
Avoid contact with engine compartment covers,
engine components and exhaust system until the
engine components and exhaust system until the
engine is cooled down.
engine is cooled down.
Preferably, the machine should be cleaned at the
end of the work shift before it is parked.
Use personal protective equipment such as
protective goggles, gloves, and protective
breathing equipment.
Start with the highest areas on the machine and
finish with the lowest on top of the fuel tank and
areas near the fuel tank.
Loose material is removed mechanically, and
only in special cases using compressed air. If
compressed air is used, wear suitable breathing
protection.
After cleaning, check and repair any leaks. Close
all covers and hoods.
3 1 6 7
4 2
5
V1156378
Areas that need to be checked and
cleaned:
1 The top of the hydraulic tank
2 Air intake, engine
3 Under the engine hood,
accumulated debris on the engine's
valve cover and other surfaces,
especially on hot surfaces such as
the DPF and burner, turbocharger,
exhaust pipe, exhaust manifold,
preheating coil, and alternator. See
figure below of the engine
compartment.
Also check and clean by the starter
motor, oil filler point, oil filters, and
fuel filter
4 The space around cooling pack, to
hydraulic oil tank, and to left-hand
side wall of rear frame.
5 Inside cooling fins and casing
6 Fuel fill point
7 The top of the fuel tank and
surrounding areas
264 264
Maintenance Maintenance
Maintenance service, when required Maintenance service, when required
www. duma -rent.com