Volvo L45H 2016 Скачать руководство пользователя страница 153

Страница: 153 / 318

Retrieving and towing

WARNING

Risk of fatal accidents by runaway machine.
Loss of braking function and steering function could
cause serious injury or death by runaway machine.
If

If the

the engine

engine cannot

cannot be

be started,

started, towing

towing must

must only be

only be

performed in an emergency situation by trained

performed in an emergency situation by trained
personnel and only the shortest possible distance

personnel and only the shortest possible distance
with very low speed. If possible, transport the

with very low speed. If possible, transport the
machine on a trailer.

machine on a trailer.

Measures

If possible, the engine should be running to make
the brakes and steering operational.

NOTE!

NOTE!
The coupling device on the counterweight or the
eyes behind the rear fenders must not be used
when recovering or towing.

Recovering

Use a towbar or other suitable means for pulling the
machine to a suitable place or trafficable road.

When recovering rearwards, use recovering eyes
(A) (accessible from behind the rear wheels).

V1160069

A Rear recovering eyes (one on each
side)

Operating instructions

Retrieving and towing

151

www.

duma

-rent.com

Содержание L45H 2016































































































































































































































































































































Результаты поиска

Содержание L45H 2016

Отзывы:

Volvo L45H 2016, Руководство оператора, Страница: 153 / 318

Результаты поиска

Содержание L45H 2016

Отзывы: