Volvo L45H 2016 Скачать руководство пользователя

Страница: 231 / 318

Maintenance service, every 10

Maintenance service, every 10
hours

hours

Test-run and check

Performed daily.

Warning decals

1 Check that all warning decals are in place, are

legible, and are not damaged, see page

External check

1 Check that the machine does not have any

external damage or defective/loose parts.
Especially tires, hoses, and pipes.

2 Check that there are no visible leaks.

3 Clean/scrape windows and rear-view mirrors.

4 Check that the work lights and headlights are

clean and intact.

5 Check that the back-up camera (optional

equipment) is clean and intact.

6 Check that the frame joint lock has been

disconnected.

7 Check that engine hood, underbody skid plates,

and protective plates are closed.

8 Check all reflectors.

9 Check that the wheels are not blocked.

10 Check that the battery disconnector is on.

Lights, instruments, and controls

1 Adjust the steering wheel and the operator's

seat. For adjusting the operator's seat, see page

2 Turn the ignition to position 1 (operating position)

and check that all control lights turn on and that
the gauges indicate readings.

3 Check that there is sufficient fuel and

AdBlue®/DEF in the tanks.

4 Check function of the work lights and headlights.

5 Check that the lap-type seatbelt can be buckled

up and is not damaged. Fasten the lap-type
seatbelt.

Maintenance

Maintenance service, every 10 hours

229

www.

duma

-rent.com

Содержание L45H 2016































































































































































































































































































































Результаты поиска

Содержание L45H 2016

Отзывы:

Похожие инструкции для L45H 2016

Бренды по названию

Популярные бренды

Volvo L45H 2016, Руководство оператора

Результаты поиска

Содержание L45H 2016

Отзывы:

Похожие инструкции для L45H 2016

Бренды по названию

Популярные бренды