Service and maintenance
102
Cleaning the machine
The machine should be cleaned regularly with conventional car
care products in order to eliminate the risk of damage to the paint
finish and other surfaces on the machine.
IMPORTANT! Avoid using strong cleaning agents or
chemicals in order to minimise the risk of damage to the
paint finish.
NOTE! Clean the areas on the machine where dust, chips and
similar may collect daily in order to minimise the risk of fire.
Recommendations for cleaning the machine
Q
Place the machine in a place intended for cleaning.
Q
Follow the instructions supplied with the car care product.
Q
The water temperature must not exceed 60 °C (140 °F).
Q
If high-pressure wash is used, keep a distance of at least
20–30 cm (8–12 in) between nozzle and machine surface. Too
high push and too short distance may cause damage. Protect
electrical leads in an appropriate way.
Q
Use a soft sponge.
Q
Finish by rinsing the whole machine with only water.
Q
Always lubricate the machine after washing.
Q
Touch-up the paint finish when required.
Paint finish maintenance
Q
Machines which are used in corrosive environment are more
prone to rusting than others. As a preventive measure it is
recommended that the paint finish should be maintained every
sixth months.
Q
At first clean the machine.
Q
Apply Dinol 77B (or corresponding transparent waxy anti-rust
agent) at a thickness of 70–80 μ.
Q
A protective layer of underseal Dinitrol 447 (or corresponding)
may be applied under the mudguards where mechanical wear
is expected.
Touch-up painting
Machines which are used in corrosive environment are more
prone to rusting than others. As a preventive measure, damaged
paint finish must be touched up and anticorrosive treatment
carried out every sixth month.
1 Wash the machine with tepid water. If high-pressure wash is
used, the nozzle must be kept at a certain distance to the
machine. The water temperature must not exceed 60 °C
(140 °F).
2 Allow the machine to dry and then lubricate it.
3 Check if any areas of the paint finish are damaged. If this is the
case – rectify these.
Содержание A35E FS
Страница 1: ...OPERATOR S MANUAL Ref No VOE21C1003521 English Printed in Sweden CST ...
Страница 44: ...Instrument panels 42 ...
Страница 158: ...Service and maintenance 156 Lubrication and service chart 10 hour 50 hour 250 hour and 500 hour service 1046083 ...
Страница 160: ...Service and maintenance 158 Lubrication and service chart ...