manualshive.com logo in svg

Volvo A35E FS, Руководство оператора


Поделиться
Скачать
background image

Operating instructions

78

Transporting the machine

Transporting the machine

Steering joint lock

During service work, lifting and transporting the machine on 
another vehicle, the steering joint should be locked.

1 Place the machine so that it is straight and turn off the engine.

2 Remove the pin from the transporting position lug and swing 

the joint lock (A) over to the locked position.

3 Install and secure the pin.

Transporting on another vehicle

Q

If the machine is driven up onto another vehicle, the steering 
joint must not be locked. Lock the steering joint when the 
machine is in position on the transporting vehicle.

Q

The transporting vehicle must be securely braked and the 
wheels blocked.

Q

If the machine is lifted, however, the steering joint should be 
locked.

Lashing the machine for transportation

Q

Lock the steering joint with the steering joint lock when the 
machine is in position on the transporting vehicle.

Q

Apply the parking brake and block the wheels.

Q

Lash the machine through the towing eyes front and rear and 
against the platform on the transporting vehicle, so that the 
machine cannot slide, tip or begin to roll.

Q

In addition to this, follow national regulations.

Q

Do not forget to unlock the steering joint and secure the 
steering joint lock in the bracket intended for this purpose, 
before operating the machine again.

IMPORTANT! If the machine is equipped with an FS-system, 
the system must always be in the lowered position during all 
service and lifting and when transporting the machine.

IMPORTANT! If the machine is equipped with an FS-system, 
the lashing must be loosened before the FS-system is 
activated. Great risk of machine damage and personal injury.

WARNING!

If the machine is driven across from a loading dock onto 
the platform of a truck or trailer, make sure that this vehicle 
is securely braked, i.e. the wheels blocked and that there is 
no risk that the vehicle will tip or tilt in a dangerous way as 
the machine is driven across.

WARNING!

Make sure that no person are close to the steering joint 
when the engine is running. There is risk of injuries by 
crushing.

A

1031118

A

Steering joint lock

1034999

Содержание A35E FS











































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для A35E FS

Crown Forklift Operator'S Manual preview
Forklift
Бренд: Crown Страницы: 21
Still ECH 12C Original Instructions Manual preview
ECH 12C
Бренд: Still Страницы: 114
Still EXU-H-18 Original Instructions Manual preview
EXU-H-18
Бренд: Still Страницы: 142
Chevrolet 6500XD 2022 Owner'S Manual preview
6500XD 2022
Бренд: Chevrolet Страницы: 312
Komatsu 930E-4SE Brochure preview
930E-4SE
Бренд: Komatsu Страницы: 4
Fisher-Price RC Truck 72824 Instructions preview
RC Truck 72824
Бренд: Fisher-Price Страницы: 4
Flextool TUFFTRUK B450E Manual preview
TUFFTRUK B450E
Бренд: Flextool Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды