manualshive.com logo in svg

Volvo A35E FS, Руководство оператора, Страница: 140 / 202

Поделиться
Скачать
Volvo A35E FS Скачать руководство пользователя страница 140

Service and maintenance

138

Brake system

Brake system

The brake system, apart from the parking brake, which is 
controlled by compressed air, is all-hydraulic and has the oil tank 
in common with the hydraulic system. Instructions for checking oil 
level, changing oil and replacing filters can, therefore, be found in 
the hydraulics section on page 149 (apart from replacing pressure-
oil filter, which can be found on the next page)

.

Parking brake, checking brake linings 

Check the brake lining wear every 1000 hours.

The minimum measure for the parking brake linings is 5 mm 
(0.20 in). 

NOTE! If the linings are worn down below 5 mm (0.20 in), the 
brake disc may be damaged.

Parking brake, adjusting

The parking brake is self adjusting. No after-adjustment is 
required.

Brake system, pressure release

Before carrying out any work on the brake system of the machine 
the pressure must be fully released. This is done according to the 
instructions below.

1 Stop the engine.

2 Depress the brake pedal several times (approx. 30–40 times) 

until the flow through the foot brake valve ceases (When the 
hissing sound has stopped and the pedal feels “spongy”).

NOTE! The system may still be pressurised even though a 
pressure gauge shows 0, depending on where the gauge is 
connected.

Checking accumulators

Contact a workshop authorised by Volvo CE.

WARNING!

Even if the engine has been stopped, there is still an 
accumulated pressure in the brake system. If the system is 
opened without the pressure having been released, oil 
under high pressure will jet out.

Brake lining, min. thickness 5 mm (0.20 in)

Содержание A35E FS











































































































































































































Отзывы:

Нет отзывов