manualshive.com logo in svg

Volvo A35E FS, Руководство оператора, Страница: 99 / 202

Поделиться
Скачать
Volvo A35E FS Скачать руководство пользователя страница 99

Safety when servicing

Handling hazardous substances

 97

Handling hazardous substances

Heated paint

When heated, paint gives off poisonous gases. Therefore, the 
paint must be removed from an area of at least 10 cm (4 in) from 
the spot where welding, grinding or gas cutting is to be carried out. 
In addition to the health hazard, the weld will be of inferior quality 
and strength, which, in the future, may cause the weld to break.

Methods and precautionary measures when removing paint

Q

Blasting

– use respirator and protective goggles

Q

Paint remover or other chemicals

– use a portable air extractor, respirator and protective 

gloves

Q

Grinding machine

– use a portable air extractor, respirator and protective 

gloves and protective goggles

Painted parts that have been discarded must never be burnt. They 
must be taken care of by an approved refuse handling plant.

Rubber and plastics which have been heated

Polymer materials can, when heated, form compounds which are 
dangerous to health and environment and must therefore never be 
burned when scrapped.

If gas cutting or welding is to be carried out near such 
materials, the following safety instructions must be followed:

– Protect the material from heat.

– Use protective gloves, protective goggles and an approved 

respirator. 

WARNING!

All paint decomposes when heated and forms compounds, 
which may cause irritation and in case of prolonged or 
repeated exposure be very health-impairing

.

Содержание A35E FS











































































































































































































Отзывы:

Нет отзывов