Volvo A35E FS Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 202

Volvo A35E FS Скачать руководство пользователя страница 10

Presentation

8

Anti-theft device (optional equipment)

An installed anti-theft device makes it more difficult to steel the
machine. Volvo CE can supply an anti-theft device as optional
equipment. If your machine is not equipped with such a device,
look into the possibility of having one installed by your dealer.

Logged machine data

The machine is equipped with a software system that registers and
stores various types of information. The information can be
transferred to Volvo CE in order to be used for product
development purposes and for troubleshooting. The stored
information contains among other items travelling speed, fuel
consumption and various temperatures. Volvo CE and its
authorised workshops will make use of this information.

CareTrack (optional equipment)

The machine can be equipped with CareTrack, a telematics
system developed by Volvo Construction Equipment. The system
stores machine data, e.g., the machine's position, operating hours,
fuel consumption, fuel level, that is available for wireless
transmission to a computer. CareTrack is available in different
versions, depending on the required information level.

CareTrack makes it easier to plan for service and reduces costly
downtime. Productivity is improved by knowing if machines are
being operated correctly and how much fuel is being consumed.
CareTrack also allows the customer to restrict the operating area
of the machine by using virtual geographic fences. This helps
eliminate unauthorised machine usage and theft. For further
information, contact a Volvo Construction Equipment dealer.

CareTrack is only available on certain markets. Contact your
dealer for more information.

Body height extension for light material
(optional equipment)

It is possible to equip the machine with body height extension in
order to transport light material.

The body height extension is attached directly to the ordinary
dump body and while it is mounted, only light material may be
transported in the dump body.

Full Suspension (FS-system)

A35E FS and A40E FS are equipped with Full Suspension, which
is an all-hydraulic suspension system. Machines with Full
Suspension do not have ordinary bogie members, rubber
elements and shock absorbers. Instead frame and wheel axles on
the machine are connected through six double-acting hydraulic
cylinders.

The suspension is adapted according to ground conditions and
load, which increases the operator comfort.

«
...
8
9
10
11
12
...
»

Содержание A35E FS











































































































































































































Отзывы:

Нет отзывов