Volvo A35E FS, Руководство оператора, Страница: 58 / 202

Operating instructions
56
The standard ISO 5006 "Earthmoving machinery – Operator’s field
of view") covers the operator's visibility around the machine and is
intended to be used to measure and evaluate visibility. Compliance
with this standard is a requirement in EU-countries and gives
improved visibility around the machine.
The machine is tested according to methods and criteria for this
standard. The method used to evaluate visibility cannot cover all
points regarding operator visibility, but it does give information to
determine if optional devices for indirect visibility are needed, e.g.,
warning systems.
The test was conducted on machines with standard equipment
and standard attachments. If the machine is modified or equipped
with other equipment or attachments, resulting in reduced visibility,
it shall be tested again according to ISO 5006.
If other equipment or attachments are used and visibility has been
reduced, the operator must be informed.
Actions before and during operation
Q
Walk around the machine and check that there are no
obstacles next to the machine.
Q
Check that mirrors and other visibility-enhancing devices are in
good condition, clean, and correctly adjusted.
Q
Check that the horn, back-up warning signal, and the rotating
beacon (optional equipment) work as intended.
Q
Check if the management has established rules and
procedures for the work site.
Q
Always pay attention around the machine to identify any
obstacles.