Volvo A35E FS Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 202

Volvo A35E FS Скачать руководство пользователя страница 17

Presentation

The USA Federal Clean Air Act

15

Normal Non-Road Engine Use

The Maintenance Instructions are based on the assumption that
this conventional machine will be used as designated in the
Operator’s Instruction Manual and operated only with the specified
fuel and lubrication oils.

Non-Road Engine Maintenance

The non-road engine is of conventional design and any local
dealer may perform the necessary non-road engine emission
control maintenance defined in this manual.

Volvo recommends that the purchaser use the service program for
the non-road engine, known as Preventative Maintenance,
including the recommended engine emission control maintenance.

In order to document that the proper regular maintenance has
been performed on the non-road engine, Volvo recommends that
the owner keep all records and receipts of such maintenance.
These records and receipts should be transferred to each
subsequent purchaser of the non-road engine.

Service Performed By Your Local Dealer

Your local dealer is best suited to give you good, dependable
service since he has trained service technicians and is equipped
with genuine original manufacturer's parts and special tools as well
as and the latest technical publications. Discuss your servicing
and maintenance requirements with your local dealer. He can tailor
a maintenance program for your needs.

For regular, scheduled service or maintenance, it is advisable to
contact your local dealer in advance to arrange for an appointment
to ensure availability of the correct equipment and service
technician to work on your machine. In this way you will aid your
local dealer in efforts to decrease service time on your machine.

«
...
15
16
17
18
19
...
»

Содержание A35E FS











































































































































































































Отзывы:

Нет отзывов