Service and maintenance
Central lubrication
163
Filling lubricant
Lubricant shall be filled before the level is below the min.
marking on the reservoir.
There is a filling connection (grease nipple) on the pump, to which
a hand pump or industrial pump can be connected for filling.
NOTE! If an industrial pump is used, clean the filter between
the connection and pump at regular intervals. A partially
clogged filter cracks easily, resulting in high risk that small
particles get in to the lubrication system. In turn, this may
lead to till malfunctions in the lubrication system.
Proceed as follows:
1 Clean thoroughly on the filling connection and the coupling on
the filler hose.
2 Fill the filler hose with grease before starting to fill. This
prevents air from getting in to the system.
3 Remove the protective cap on the filling connection and
connect the coupling on the filling connection.
4 Fill lubricant to the max. level on the reservoir.*) If it is difficult
to pump in lubricant, either the filter behind the filling
connection may be clogged or there may be dirt in the nipple
itself. Clean the filter, change the nipple if needed, and try
again.
5 Reinstall the protective cap.
6 Store the grease pump in a dust-free space, so that it is not
exposed to dirt.
*) If the reservoir is filled above max. level, the excess lubricant is
drained through the breather hole on the left side of the reservoir.
Air under the plate in the reservoir is also drained through the
breather hole.
1041515
Filling connection
Содержание A35E FS
Страница 1: ...OPERATOR S MANUAL Ref No VOE21C1003521 English Printed in Sweden CST ...
Страница 44: ...Instrument panels 42 ...
Страница 158: ...Service and maintenance 156 Lubrication and service chart 10 hour 50 hour 250 hour and 500 hour service 1046083 ...
Страница 160: ...Service and maintenance 158 Lubrication and service chart ...