Volvo A35E FS, Руководство оператора, Страница: 30 / 202

Instrument panels
28 Display unit
Display unit
On the display unit, located on the centre instrument panel, is
shown starting sequence, component information, operating
information, alarm screens and error codes.
When starting the electronics, the screen will
display:
Machine hours
When the battery disconnect switch is switched on and the ignition
switch is in position 0, the screen shows accumulated number of
machine hours. If the machine is equipped with anti-theft device,
see page 41.
Initial display
When the ignition switch is turned from position 0 via R to 1, the
electronics will start up. Control lamp test is carried out. Initial
display is shown on the display unit as an increasing number of
rectangles.
The precondition is that the function "Delayed engine stop"
(optional equipment) is deactivated, see page 26.
This sequence takes a few seconds. Thereafter the electronics is
ready for the engine to be started and the ignition key can be
turned to starting position (3).
Operating information
When the start-up of the electronics is completed, the Operating
Information screen will be shown.
When stopping the electronics, the screen will
display:
When the ignition key is turned from position 1 to R or 0, the
electronics of the machine will be closed down in a controlled way.
This will be shown on the display unit screen as a reducing number
of rectangles, after which the engine stops. This sequence takes a
few seconds.
When the ignition switch is turned off, the screen with accumulated
number of machine hours will be shown.
If the function "Delayed engine stop" (optional equipment) is
activated, see page 26, the engine will not stop until "the delay
time" has elapsed. If the ignition key during this time is turned from
position 0 to running position 1, the delay is interrupted.
Machine hours
VOLVO
A9006400
Screen, starting sequence
Operating information
VOLVO
A9006400
Screen, closing down sequence