Volvo Penta 21182210, Руководство оператора

Страница: 149 / 192

Cooling System
NOTICE! Do not run the engine without the thermostat
as the engine is likely to overheat.
Replacing the Engine Thermostat
50536
For instructions on replacing the engine thermostat on
closed cooling engines, please see the
Do It Your-
self manual.
5.0–5.7L Engines (Raw Water Cooled)
1. Loosen and remove long bolt 1 ; save for reuse.
2. Place lifting eye 2 in a secure location; you will
need to reattach it later.
3. Loosen and remove short bolt 3 ; save for reuse.
4. Remove thermostat housing 4 .
5. Remove thermostat 5 , O-ring 6 , and gasket 7
from intake manifold 8 . Discard gasket and ther-
mostat. Inspect O-ring and, if damaged, replace.
6. Clean intake manifold and thermostat housing
surfaces where the gasket makes contact.
Remove any remnants of the old gasket.
NOTICE! Take care not to drop any debris into
the intake manifold. Place a rag in the intake
manifold to keep debris out; remove when clean-
ing is completed.
7. Place new gasket, new thermostat, and O-ring
into the groove in the intake manifold.
8. Replace thermostat housing.
9. Install bolts and lifting eye.
10. Torque bolts to 18–30 ft. lb. (25–41 Nm).
Maintenance
47700387 06-2009 147