manualshive.com logo in svg

Volvo Penta 21182210, Руководство оператора


Поделиться
Скачать
background image

Stop the Engine Before Service

Stop the engine before opening or removing engine
hatches. Unless otherwise specified all maintenance
and service must be carried out with the engine stop-
ped.

Always stop the engine and turn off the main battery
switch(es) before working on the electrical system.
Disconnect and remove any shore power connections
to the boat.

To prevent accidentally starting the engine, remove the
ignition key, turn off the power supply to the engine at
the main switches, and lock them in the OFF position,
or disconnect the battery cables from the battery
before starting work. Put up a warning sign in the con-
trol position that work on the engine is being carried
out.

Approaching or working on an engine that is running is
dangerous. Loose clothing, hair, fingers or a dropped
tool can be caught in the rotating parts of the engine
and cause serious personal injury. We recommend
that all servicing with the engine running be undertaken
by an authorized Volvo Penta workshop.

Starting the Engine After Service

Reinstall all protective parts removed during service
operations before starting the engine. Make a point of
familiarizing yourself with other risk factors, such as
rotating parts and hot surfaces (exhaust manifold,
starter, etc.). Check that no tools or other items have
been left on the engine.

Fire and Explosion

Fuel and Lubrication Oil

All fuels, most lubricants, and many chemicals are
flammable. Read and follow the instructions on the
packaging.

When carrying out work on the fuel system make sure
the engine is cold. A fuel spill onto a hot surface or
electrical components can cause a fire.

Store fuel soaked rags and other flammable material
so that there is no danger of them catching fire. Fuel
soaked rags can self-ignite under certain conditions.

Certain engine oils are flammable. Some of them are
also dangerous if inhaled. Whenever you use these
agents, follow the manufacturer’s instructions on the
product packaging. Ensure that ventilation in the work
place is good. Use a protective mask when spraying.

Maintenance

47700387 06-2009

139

Содержание 21182210

































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 21182210

Hyster C236 Service & Repair Manual preview
C236
Бренд: Hyster Страницы: 25
Perkins 1104D Operation And Maintenance Manual preview
1104D
Бренд: Perkins Страницы: 112
ALL POWER AMERICA GE208 Owner'S Manual preview
GE208
Бренд: ALL POWER AMERICA Страницы: 28
Hitachi 4HK1 Workshop Manual preview
4HK1
Бренд: Hitachi Страницы: 41
Hitachi SH7750 series Hardware Manual preview
SH7750 series
Бренд: Hitachi Страницы: 1037
Hitachi SH7751 Hardware Manual preview
SH7751
Бренд: Hitachi Страницы: 1104
HAMPTON BAY 14826 Manual preview
14826
Бренд: HAMPTON BAY Страницы: 17
Daewoo DE12 Shop Manual preview
DE12
Бренд: Daewoo Страницы: 165
Yanmar 2QM15 Service Manual preview
2QM15
Бренд: Yanmar Страницы: 222
Alutech AM0/06-28 Operation Manual preview
AM0/06-28
Бренд: Alutech Страницы: 32
Honda GX 630RH QZB2 Manual preview
GX 630RH QZB2
Бренд: Honda Страницы: 42
NACIONAL MOTOR Derbi Euro 2 Workshop Manual preview
Derbi Euro 2
Бренд: NACIONAL MOTOR Страницы: 72
V2 LEX-KNX Installation Manual preview
LEX-KNX
Бренд: V2 Страницы: 16
SOMFY Dexxo Pro 1000 RTS User Manual preview
Dexxo Pro 1000 RTS
Бренд: SOMFY Страницы: 9
Cuyuna 215 R/D Owner'S Manual preview
215 R/D
Бренд: Cuyuna Страницы: 51
KaVo EWL 4029 Operating Instructions Manual preview
EWL 4029
Бренд: KaVo Страницы: 10
Oriental motor K II S Series Operating Manual preview
K II S Series
Бренд: Oriental motor Страницы: 4
Sumitomo Cyclo BBB Operation And Maintenance Manual preview
Cyclo BBB
Бренд: Sumitomo Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды