47
8. Buttons and control knob
Button
Function
Change measuring range
Enable reference value measurement
Trigger split display in <
> or <
> mode
Switch modes (see red/black icons on control dial)
Display maximum/minimum reading
Disable automatic backlight
Fix current reading on display
Use the control knob (16) to select a measuring mode/range.
Automatic range selection [ AUTO ] is enabled in modes:
-
/
/ / /
/
/
/
This means that the appropriate measurement range will be
selected automatically.
To select the modes marked in red, press the SELECT
button (5) (e.g. to switch from resistance to continuity test).
Some modes require different procedures, which are described
in the corresponding sections.
References to the control knob positions are
indicated by < mode > throughout the manual.
Example: Select <
> mode.
