Volpi Tecno Energia PAGURO 3000 compact, Руководство пользователя

Страница: 34 / 54

34
This device provides more fuel from the injection pump. There are two positions for the knob:
up (off) and down (activated) pull down to activate.
After starting the knob returns automatically in the original position.
Manual start
To manually start the engine, follow the procedure described below.
1. Set the Automatic Decompression Device pointer to the Neutral position (see illustration).
Compression is released when the pointer is in this position.
2. Insert the crank handle into the crank handle guide (see illustration). Starting to the right hand
on top of the control box and grip the crank handle with your left hand, with the thumb on
your left hand in the position shown in the illustration.
3. Crank the engine counter clockwise approximately 10 to 20 times until the engine turns freely.
Then remove the crank handle.
4. Push the start button.
5. Check if the fuel solenoid ON indicator is lighted on the control panel. If it is lighted, it
indicates there is sufficient voltage for a manual start.
6. Set the Automatic Decompression Device pointer to the manual starting position (see
illustration). When hand-cranking in this position, automatic decompression will occur.
7. Pull down the Cold Starting Device.
8. Insert the crank handle into the crank handle guide (see illustration). Standing to the right of
the crank handle, put your right hand on top of the control box and grip the crank handle with
your left hand, with the thumb on your left hand in the position shown in the illustration.
9. Slowly crank the engine counter clockwise 4 times, then crank the engine as fast as possible.