Volkswagen 1995 Volkswagen Golf III GL, Руководство по обслуживанию

Страница: 9 / 60

Fig. 6: Removing A/C Condenser With Hoses Attached
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Removal (Beetle)
1. Disconnect and remove battery. Relieve fuel pressure. See FUEL PRESSURE RELEASE . Remove
engine cover. Remove power steering reservoir from battery tray with hoses attached and secure
aside. Disconnect fuel supply and return hoses from fuel rail.
2. Remove air cleaner. Disconnect shift linkage from transmission. On M/T models, remove slave
cylinder. On all models, remove engine undercover. Drain engine coolant from radiator. Drain engine
coolant from engine by disconnecting coolant hose from oil cooler.
3. Remove accessory drive belt. Remove cooling fan on right side of vehicle (if equipped). Remove
power steering hose brackets. Remove power steering pump with hoses attached and set aside.
4. On vehicles equipped with A/C, it is not necessary to discharge A/C system. Remove refrigerant hose
brackets. Remove A/C compressor with hoses attached. Secure A/C compressor aside to prevent
stressing hoses.
5. Disconnect any hoses interfering with engine/transmission removal. Remove secondary air injection
pump. Disconnect any electrical connectors necessary for engine/transmission removal. Remove
torque rod from transmission.
6. Remove axle shafts from transmission. See AXLE SHAFTS - FRONT article in DRIVE AXLES.
Remove exhaust pipe from exhaust manifold. Remove coolant hose bracket under engine block.
1995 Volkswagen Golf III GL
2.0L 4-CYL
1 января 2005 г . 1:18:59 Page 9 © 2004 Mitchell Repair Information Company, LLC.