Volkswagen 1995 Volkswagen Golf III GL, Руководство по обслуживанию

Страница: 39 / 60

Fig. 29: Locating TDC Mark on Transaxle (Beetle - AEG Engine)
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig. 30: Checking Timing Belt Tension (Beetle - AEG Engine)
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Testing (Semi-Automatic Toothed Belt Tensioning Roller; Engine Code "AEG")
1. Place camshaft sprocket on cyl. No. 1. TDC.
2.
Press hard with thumb on camshaft drive belt. Indicator -2- must move (use mirror).Turn crankshaft
two rotations in direction of engine direction until engine is again at TDC cyl. 1. When doing this, it is
important that last 45° (1/8 turn) turn is performed without stopping.
3.
NOTE: If testing vehicle timing belt tension as an inspection, manufacturer
recommends tensioning timing belt with engine warm to the touch. If engine
is hot, allow to cool down.
NOTE: Check using a mirror.
NOTE: Check using a mirror.
1995 Volkswagen Golf III GL
2.0L 4-CYL
1 января 2005 г . 1:19:01 Page 39 © 2004 Mitchell Repair Information Company, LLC.