Volkswagen 1995 Volkswagen Golf III GL, Руководство по обслуживанию

Страница: 45 / 60

Fig. 33: Measuring Valve Installed Height
Courtesy of VOLKSWAGEN UNITED STATES, INC.
2. This measurement determines installed valve height. Subtract measured distance from minimum
specification. See MINIMUM VALVE INSTALLED HEIGHT table.
MINIMUM VALVE INSTALLED HEIGHT
3. The difference is maximum refacing allowable for valve and seat. If valve installed height is less than
specification, replace cylinder head assembly. If valve installed height is too low or too high, cam
followers will not work correctly.
Valves
Measure valve stem diameter and valve margin. If not within specification, replace valves. DO NOT reface
valves with machine. Lap valves by hand ONLY. Replace as necessary. See
VALVES & VALVE
SPRINGS table under ENGINE SPECIFICATIONS.
VALVE TRAIN
Lifters (Cam Followers)
Application In. (mm)
Intake Valve 1.331 (33.80)
Exhaust Valve 1.343 (34.10)
1995 Volkswagen Golf III GL
2.0L 4-CYL
1 января 2005 г . 1:19:01 Page 45 © 2004 Mitchell Repair Information Company, LLC.