Volkswagen 1995 Volkswagen Golf III GL, Руководство по обслуживанию

Страница: 46 / 60

Test lifters by pushing then downward with a suitable wooden dowel with camshaft lobe pointing up. If
lifter can be pushed downward more than .004" (.10 mm), replace lifters. Lifters must be replaced as a set.
CYLINDER BLOCK ASSEMBLY
Piston & Rod Assembly
1. Ensure piston, connecting rod and rod caps are marked with matching cylinder number prior to
removal. Ensure engine front arrow is marked on top of piston and front mark exists on rod and cap.
See
Fig. 34 . Pistons and rods are to be replaced in sets of 4. Rod cap bolts and nuts must be replaced
after removing or loosening.
CAUTION: If lifters are charged with oil, allow 30 minutes for followers to bleed down
before starting engine. Pistons may strike valves, resulting in bent valves.
1995 Volkswagen Golf III GL
2.0L 4-CYL
1 января 2005 г . 1:19:01 Page 46 © 2004 Mitchell Repair Information Company, LLC.