VOKERA Maxin 24e Скачать руководство пользователя страница 10

Страница: 10 / 57

MAXIN 24e & 28e

SECTION 5 INSTALLATION

5.1

Delivery (fig. 7)

The appliance is delivered in a heavy duty
cardboard carton.

Lay the carton on the floor with the writing the
correct way up.

5.2

Unpacking (fig. 8)

Pull both sides of the carton open. Do not use
a knife. Unfold the rest of the carton from
around the appliance.

Lay the appliance with the black frame on the
floor. Remove the two polystyrene blocks one
at the top and the other at the base of the
appliance.

Remove the hanging bracket from the top
polystyrene block and the box containing the
fixing kit from the lower polystyrene block.

The fixing kit contains

1 - Hanging bracket
1 - Fittings pack containing:
Central heating valves & tap connectors (2)
Gas service tap (1)
Cold water stopcock (1)
Hot water outlet (1 nut & tail)
Various washers
Flue Kit supplied in separate carton.

5.3

Preparing for Mounting

5.3.1

Remove the 2 screws securing the front con-
trol panel and remove the 2 screws securing
the lower part of the casing to the case frame.

5.3.2

Slightly lift the casing and slide it gently to-
wards the top of the appliance to disengage
the case from the top suspension hooks. (Fig.
9)

5.3.3

Ensure the casing and screws are put to one
side in a safe place.

5.3.4

Loosely fit (hand tight) the valves and fittings
using the washers supplied (Figs. 6a & 10).

C/H

Flow

D/H/W

Outlet

Cold

Water

Inlet

C/H

Return

Safety

Valve

Outlet

Gas

Fig. 7

Fig. 8

Fig. 9

Fig. 10

Содержание Maxin 24e


























































Результаты поиска

Содержание Maxin 24e

Отзывы:

Бренды по названию

Популярные бренды

VOKERA Maxin 24e, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Maxin 24e

Отзывы:

Бренды по названию

Популярные бренды