VOH PAViX, Руководство пользователя

Страница: 36 / 48

VOH SA
GU-04-06-01
PAViX - User Guide
Version 3.2
Created 10.2017
Page 36 / 48
6.3.1.2 Taking movement holder reference with the scanner
Using the bar code reader streamlines taking of reference 0. The PAViX provides the option to store the heights
of the part-holder so as to avoid recording this reference when starting the program. To do this, the part-holders
must have bar codes. Starting a program is then done as follows.
PAViX screen Comment(s)
Once the program is started, the user is
prompted to:
1) Record the reference in accordance
with standard procedure (Refer to
6.3.1.1, page 35)
2) Scan a part-holder bar code
NOTE: If the bar code is known, the PAViX
places itself directly in Hand-setting mode.
By pressing and holding the left-hand side
button, it is possible to change the height of a
part-holder whose bar code is already known.
Once the button is pressed down, simply follow
the information on the screen.
If the bar code of the scanned part-holder is
not known, the user is prompted to create a
new part-holder. To do this, simply press the
right-hand side button.
The PAViX then guides the user through the
standard reference recording procedure
Once the reference is recorded, simply
validate for the part-holder to be stored and for
the program to start
NOTE: Part-holder bar codes must contain 5 characters (alphanumeric).