Page | 18
10.
Turn the bottom perforator anti-clockwise until loose (10.1). Depending on the media and material being used you might
require both angle wheels (10.2) and more pressure on the pneumatic splitting (10.3). If the second angle wheel is needed
ensure the angle wheel on the left is angled more than the one directly next to the perforator. Pneumatic splitting pressure
for single sided is usually between 0.2-0.4psi and double sided between 0.4-0.6psi.
11.
Ensure the top and bottom films are correctly aligned.
10.1
10.2
10.3
