Page | 14
4.
Thread the foil in-between the angle wheels and perforator support bars (4.2), under and around the rear express kit idle
bar (4.3) and attach the take up unit as shown below (4.4). Select the temperature and pressure required, lower the
laminating roller pressure and put the safety guard on. When foiling we do NOT need the pull roller, this must remain in
the up position (4.5).
For foiling temperatures and pressures please see the handy hints on page 23 for Pneumatic and Duplex models and page 24 for
metallic.
4.1
4.2
4.3
4.4
4.5
