Page | 10
6.
Place a plain thick (i.e.300gsm) card into the back of the machine (6.1) taking care to go the middle of every roller (6.2) until
reaching the feed gate (6.3), then place another plain card and cover the top laminating roller (6.4).
7.
If you have a metallic model, please ensure the two idle bars are used (7.1). Holding the corners of the film (7.2), thread under
the patterned idle bar (7.3) and place back onto the film roll (7.4). Remove the card covering the roller (7.5). Now is the time to
clean the roller if there is any glue or marks. For a chrome roller we recommend using Amberklene ME-20 heavy duty solvent
(7.6) and for rubber rollers use the Amberclens anti-static foaming cleaner (7.7). When using the cleaner please spray into a
cloth/paper towel away from the machine, then apply to the roller.
6.1
6.2
6.3
6.4
7.1
7.2
7.3
7.4
7.5
7.6
7.7
