Page | 9
Single-sided Laminating
1.
Turn the power on.
2. Set paper length (exclude the desired overlap i.e. 450gsm = 445mm) and set
temperature to 80
o
C.
3.
Remove film mandrel off the system and loosen the core collar using the blue 5mm Allen key provided (3.3)
4.
Slide film onto the mandrel and centralize (4.1). Replace the core adaptor and tighten. Place the mandrel back onto the system
and tighten the mandrel lock (4.3).
5.
Ensure the film feeds from the bottom (5.1) of the roll and mechanical anti-curl is set to zero (5.2). Remove safety guard (5.3).
3.2
3.3
4.3
1.1
2.1
3.1
4.1
4.2
5.1
5.2
5.3
Duplex Pneumatic/Metallic
