Transcendent NVR Series
41
Refer to the picture as shown below. Drag the mouse from C to D to get a green rectangle and
the rectangle area will be zoomed out.
Ø
Advanced 3D Control
Double click the left button of the mouse on any area of the camera image and then the image
size will be doubled and centered on the clicked point.
Press and hold the left button of the mouse on any area of the camera image to zoom in the
image; press and hold the right button to zoom out the image.
Move the cursor of the mouse to the camera image and then slide the scroll wheel of the mouse
forward to zoom in the image, slide the scroll wheel of the mouse backward to zoom out the
image.
Ø
Preset Setting
Click “Preset” to go to preset operation tab and then click “Add” button to pop up a window as
shown below. Select the preset and then input the preset name in the window; finally click “OK”
button to save the settings. You can add 255 presets for each dome.
Transcendent NVR Series
42
Adjust the dome’s direction and then click “Save Position” to save the current preset position
(you can also click another preset in the preset list and then save the preset position after
adjusting the dome’s direction); click
in the preset list to call the preset; click “Delete”
button to delete the selected preset.
You can also go to preset setting interface for preset setting, see 6.2 Preset Setting for details.
Ø
Cruise Setting
Click “Cruise” to go to cruise operation tab and then click “Add” button to pop up a window as
shown below left. You can add 8 cruises for each dome at most.
�
Input the cruise name in the “Add Cruise” window and then click “Add preset” to pop up
the “Add Preset” window (Before adding preset to the cruise, please add preset of the dome
first).
�
In the “Add Preset” window, select the preset name, preset time and preset speed and then
click “OK” button.
�
In the “Add Cruise” window, you can click
to reselect the preset, then change the
preset time and speed. Click
to delete the preset. Click “Add” button to save the cruise.
Click
to start the cruise and click
to stop the cruise in the cruise list of the cruise
operation tab; click “Delete” button to delete the selected cruise.
You can also go to cruise setting interface for cruise setting, see 6.3 Cruise Setting for details.
6.2 Preset Setting
Click Start
à
Settings
à
Camera
à
PTZ
à
Preset to go to the interface as shown below.
Содержание Transcendent Series
Страница 97: ...Transcendent NVR Series 96 Fig 11 1 Fig 11 2 ...