Transcendent NVR Series
89
Operation
panel introduction:
Button
Meaning
Click to take snapshot.
Click to start recording; click it again to stop recording.
Click to zoom in the image of the camera and then drag the mouse on the
camera image to view the hidden area.
Click to zoom out the image of the camera.
The 3D zoom in function is designed for PTZ’s Click the button and then
drag the image to zoom in or zoom out the image; click the image on
different areas to view the image of the dome, Omni-directionally.
Click to close the preview camera.
Click to enable audio and then drag the slider bar to adjust the volume. You
can listen to the cameras audio by enabling audio.
PTZ
panel introduction:
Button
Meaning
Click
/
/
/
/
/
/
/
to rotate the dome; click
to stop rotating the dome.
Drag the slider to adjust the rotating speed of dome.
Click
/
to zoom in/out camera image.
Click
/
to increase/ decrease the focal length.
Click
/
to increase/decrease the iris of the dome.
Click it to view the preset list and then click the button in the list to call
the preset.
Click it to view the cruise list and then click the corresponding buttons
in the list to start or stop the cruise.
11.10.2 Remote Playback
Click “Playback” in the remote interface to go to the playback interface.
�
Check the record event types and cameras on the left panel. Set the record date on the
calendar beside the time scale.
�
Click
to search the record data and then click
or directly click the
time scale to play the recording.
The operation of the playback time scale is similar to that of the time scale in the main program
of the NVR. Please refer to 8.2 Playback Interface Introduction for details.
Introduction of playback control buttons:
Transcendent NVR Series
90
Button
Meaning
Stop button.
Rewind button. Click to play video backward.
Play button. Click to play video forward.
Pause button.
Deceleration button. Click to decrease the playing speed.
Acceleration button. Click to increase the playing speed.
Previous frame button. It works only when forward playing is paused in single screen mode.
Next frame button. It works only when forward playing is paused in single screen mode.
Click
to step backward 30s and click
to step forward 30s.
Backup start time button. Click the time scale and then click to set the backup start time.
Backup end time button. Click the time scale and then click to set the backup end time.
Backup button.
Backup tasks button. Click to view the backup status.
Event list button. Click to view the event record of manual/schedule/sensor/motion.
11.10.3 Remote Backup
Click “Backup” in the remote interface to go to the backup interface. You can back up the
record by event or by time.
Ø
By Event
Check the record type on the left side of the interface and then click
to set the start time
and end time; check the cameras and then click
on the right side to search the record (the
searched recorded data will be displayed in the list); check the recorded data in the list and then
click “Backup” button to backup the record.
Ø
By Time
Click
to set the start time and end time on the left side of the interface; check the
cameras and then click
on the right side to backup the recording.
View Backup Status
: Click “Backup Status” to view the backup status. Click “Pause” to pause
the backup; click “Resume” to continue the backup; click “Delete” to delete the task.
11.10.4 Remote Configuration
Click “Function Panel” in the remote interface and then configure the camera, record, alarm,
disk, network, account and authority and system of the NVR remotely. All of these settings are
similar to that of the NVR. See the configurations of the NVR for details.
Содержание Transcendent Series
Страница 97: ...Transcendent NVR Series 96 Fig 11 1 Fig 11 2 ...
