Transcendent NVR Series
85
Input the serial number (click
on the tool bar at the bottom of the live preview interface to
see the serial number of the NVR), user name (the user name of the NVR,
admin
by default)
and password (the password of the NVR,
123456
by default) of the NVR, select the display
language on the top right corner of the interface and then click “Login” button to go to the web
client interface.
Ø
PPPoE Access
�
Click Start
à
Settings
à
Network
à
TCP/IPv4 to go to the “TCP/IPv4” interface. Check
“Enable” in the “PPPoE settings” and then input the username and password you get from your
ISP. Click “Apply” to save the settings.
�
Click Start
à
Settings
à
Network
à
Network Status to view the IP address of the NVR.
�
Open IE browser on a computer, input the IP address of the NVR like
http://210.21.229.138 in the IE address bar and then press enter to go to the login interface.
Input the username and password of the NVR in the interface and then click “Login” to go to
the live preview interface.
Ø
Router Access
�
Click Start
à
Settings
à
Network
à
TCP/IPv4 to go to the “TCP/IPv4” interface. Set the IP
address, subnet mask, gateway, preferred DNS and alternate DNS of the NVR.
�
Set the HTTP port (it is suggested to modify the HTTP port because the default HTTP port
80 might be taken up) and enable UPnP function in both the NVR and the router. If the UPnP
function is not available in the router, you need to forward the LAN IP address, HTTP port and
server port of the NVR to the router. Port mapping settings may be different in different routers,
so please refer to the user manual of the router for details.
�
Get the WAN IP address of the NVR from the router. Open IE browser on a computer,
input the WAN IP address plus HTTP port like http://116.30.18.215:100 in the IE address bar
and then press enter to go to the login interface. Input the username and password of the NVR
in the interface and then click “Login” to go to the live preview interface.
Note: If the WAN IP address is a dynamic IP address, it is necessary for you to use the domain name to
access the NVR. Click Start
à
Settings
à
Network
à
DDNS to set DDNS (see 11.1.3 DDNS
Configuration for details). By using DDNS function you can use the domain name plus HTTP port like
http://sunshine.dvrdydns.com:100 to access the NVR via internet.
Transcendent NVR Series
86
11.10 Web Remote Control
The supported browsers of the remote surveillance are IE8/9/10/11, Firefox, Opera and
Chrome (available only for the versions lower than 45) in Windows system and Safari in MAC
system.
When you access the NVR through IE for the first time, you need to download and install the
relative components for normal live view and playback. Please refer to the tips in the remote
interfaces for details. The buttons and icons on the top right corner of the remote interface are
introduced as follows.
admin
: the current login username.
Logout
: click it to log out and return to the login interface.
Modify Password
: click it to change the password of the current login user. Input current
password and then set a new password in the popup window. Click “OK” button to save the
new password.
Local Settings
: click it to change the local settings. Set the snapshot number and click “Browse”
to set the snapshot path and record path as shown below. Click “Apply” button to save the
settings.
11.10.1 Remote Preview
Click “Live Display” in the remote interface to go to the preview interface. The preview
interface consists of the four areas marked in the following picture.
Содержание Transcendent Series
Страница 97: ...Transcendent NVR Series 96 Fig 11 1 Fig 11 2 ...