Vitek Transcendent Series, Руководство пользователя

Страница: 83 / 104

Transcendent NVR Series
81
Device Name
: The name of the device. It may display on the client end or CMS that help user
to recognize the device remotely.
Video Format
: Two modes: PAL and NTSC. Select the video format according to the camera.
11.2.2 Date and Time Configuration
Click Start
à
Settings
à
System
à
Basic
à
Date and Time to go to the interface as shown below.
Set the system time, date format, time format and time zone of the NVR. The default time zone
is GMT+08 Beijing, Hong Kong, Shanghai, Taipei. If the selected time zone includes DST, the
DST of the time zone will be checked by default. Click “Apply” to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual : select “Manual” in the “Synchronous” option and then click after the “System
Time” option to set the system time.
NTP : select “NTP” in the “Synchronous” option and then input the NTP server.
Transcendent NVR Series
82
11.3 Factory Default
Click Start
à
Settings
à
System
à
Maintenance
à
Factory Default and then click “Reset to
factory default” button in the interface to reset to the factory default settings.
11.4 Device Software Upgrade
You can click Start
à
Settings
à
System
à
Information
à
Basic to view MCU, kernel version
and firmware version etc. Before upgrade, please get the upgrade file from your dealer.
The upgrade steps are as follows:
�
Copy the upgrade software into the USB storage device.
� Insert the USB storage device into the USB interface of the NVR.
� Click Start
à
Settings
à
System
à
Maintenance
à
Upgrade to go to “Upgrade” interface.
Select the USB device in “Device Name” option and go to the path where the upgrade software
exists. Select the upgrade software and then click “Upgrade”. The system may automatically
restart during upgrading. Please wait for a while and do not power off the NVR during
upgrading.
11.5 Backup and Restore
You can back up the configuration file of the NVR by exporting the file to other storage
devices; you can load the configuration to other NVRs which are the same model by importing
the configuration file.
Insert the USB storage device into the USB interface of the NVR and then click
Note: The file system of the USB mobile device which is used for upgrading, backing up and
restoring should be FAT32 format.