Vitek Transcendent Series, Руководство пользователя

Страница: 52 / 104

Transcendent NVR Series
51
7.4.2 Timing Recording
Timing Recording : the system will record automatically according to the schedule.
Set the timing record schedule of each camera. See 7.3 Schedule Setting for details.
7.4.3 Motion Based Recording
Motion Based Recording : the system will start motion based recording when motion activity
appears during the scheduled times. The setup steps are as follows:
�
Set the motion based recording schedule of each camera. See 7.3 Schedule Setting for
details.
�
Enable motion and set the motion area of each camera. See 9.2.1 Motion Configuration for
details.
The camera will start motion based recording once you finish the above settings.
7.4.4 Sensor Based Recording
� Set the sensor based recording schedule of each camera. See 7.3 Schedule Setting for
details.
�
Set the NO/NC type of the sensor, enable the sensor alarm and then check and configure
the “Record”. See 9.1 Sensor Alarm for details.
7.5 Disk Management
Click Start
à
Settings
à
Disk
à
Disk Management to go to disk management interface. You can
view the NVR’s disk number and disk status in the interface. Click “Formatting” button to
format the HDD.
7.5.1 Storage Mode Configuration
Click Start
à
Settings
à
Disk
à
Storage Mode to go to the interface as shown below.
Note: New HDD’s need to be formatted for normal use.