Vista SmartDisc VLS-DR, Руководство по установке

Страница: 33 / 64

5 Functional description
34 Vista SmartDisc
5.3 Sample Applications
Example 1: Recording without external control (detectors)
If you wish to record video images without connecting an external sensor,
door contact, PIR, detector or the like to one of the image recording inputs,
this can be configured easily with the appropriate settings. Configure the set-
tings for the appropriate camera for an open cicuit recording input, in other
words for the
High state:
■
Select the desired camera.
■
Set the dropdown lists Low , Pulse + and Pulse - to "OFF".
■
Select "ON" in the dropdown list High .
■
Enter the interval between the recording of consecutive imag-
es in the entry field
Image every [] s .
■
Save these settings with OK.
Recording can also be controlled by means of the timer.
Example 2: Recording with the integrated motion detection
without external control
You can control the recording with the integrated software motion detector
without using any external detectors. With the following settings, you can
configure the digital image archiving device to only record images when mo-
tion is detected in the video image:
■
Select the desired camera.
■
Set the dropdown lists Low , Pulse + , and Pulse - to "OFF".
■
Select "", "Motion" or "Motion -" in the dropdown
list
High .
■
Enter the interval between the recording of consecutive imag-
es in the entry field
Image every [] s .
■
In the Number entry field, specify how many images should
be recorded each time a motion is detected.
■
Save these settings with OK.
Example 3: Recording with closed control input
The image recording can also be controlled by external events at any time. To
this end, a detector that opens or closes the input when the event to be re-
corded takes place is connected to the appropriate image recording input.
The following settings activate the recording when the input is closed:
■
Select the desired camera.
■
Set the dropdown lists High , Pulse + , and Pulse - to "OFF".
■
Select "ON" in the dropdown list Low .
■
Enter the interval between the recording of consecutive imag-
es in the entry field
Image every [] s .
■
Save these settings with OK.
Example 4: Recording upon a change of control input state
(closing in this example)
Depending on what type of detectors you use or which events you would like
to record, you can also use a change of state at an image recording input to