Vista SmartDisc VLS-DR, Руководство по установке

Страница: 25 / 64

4 Start-up
26 Vista SmartDisc
Short Description SmartTel Receiver software
Screen Shot: SmartTel Receiver software online window
Display elements
Error relay When the Error relay is displayed in red, this indicates that a fault has been
detected in the image archiving device. The actual cause is saved in the log
file and can be called up by clicking
Settings (see “5.4 Log File” on page 36) .
Alarm input enable /
disable
All input states of the control interface are displayed in the central operating
panel. The display of a red LED for a control input indicates that this input is
active. Whether the input is signalled green or red when it is closed depends
on the transmitter settings
normally opened or normally closed (see “16-
way control interface” on page 15) .
Video input 1-4 The LEDs labelled Video input 1-4 indicate the state of the four control in-
puts for recording control. A grounded input ( LOW ) is red, an open input
( HIGH ) is green. These are used to specify the recording options in the archive
settings.
Buttons The camera button labels are displayed in red when control inputs 1-4 are ac-
tivated.
Control
Relay If the SmartDisc relays are configured as latching or momentary, they can be
operated in the lower right corner of the online window.
Display You can change the display of the camera images by clicking the buttons
Mainscreen , Quadscreen and Fullscreen (or by clicking the video image).
Image quality The slider on the right below the video image can be used to change the im-
age quality and picture frequency.