27
Changes can be made without prior noticy. All rights reserved.
© Viscoo Enterprises Ltd. –
www.viscoo.nl
the alarm status Information screen looks like this:
Here is the alarm type that is shown for each individual
channel: sensor alarm (red color), motion alarm (yellow) and
video loss alarm (blue color). You can delete alarms by
pressing the "CLEAR" button on the front of your recorder or
remote control or click the "Clear Alarm" button with your
mouse.
4.10.4 Online Status
Here is the information shown on any remote PC or mobile
phone connected to the recorder. Here you will find
information such as IP address, login and Logout time, etc.
This interface is as follows:
4.10.5 Log Information
The log Information screen looks like this:
At the bottom of the interface is the page number .
The user can click to page up / down to navigate to
another page. The number of rows returned in the
log is unlimited. The log file can not be recognized on
the PC. One can only see this with the client software.
Contents of the log: system on and off, changing the
version log, alarm log, PTZ control log, users and log
out log, changes in system parameters, recording
playback log, backup log, format HDD log user login
client log, etc.
4.
11 Software Upgrade
There are two ways to upgrade your digital video recorder. 1.
The PC client software, 2. Via a USB stick directly on the
recorder. Read the following information carefully before you
start an upgrade.
4.11.1 Client Software Upgrade
Please check the version of the DVR before you upgrade so that you can always return to the
older version when the upgrade fails. When the system is running well with almost no
defects, it becomes strongly discouraged to update the system.
If you want to upgrade you must ensure that the power is OK and that the network is stable.
When the update is interrupted, there may be serious flaws in the recorder afterwards.
Please ensure that the upgrade for your device is compatible, check the model number and
whether the interface has a boot and whether it corresponds with all that which is stated on
your recorder. If you do not update correctly, the unit must be returned to the factory, in
your case the office of Viscoo Netherlands BV!
After an upgrade, you can consult the manual for the adjustment of the new version, which
can be downloaded from the website.
